Alcatel 4035 - Management from the attendant set

3BA 19875 ENAA - Ed. 02 - April 2000 - Alcatel 4035 - Attendant set 3-1
Chapter
3 Management from the attendant
set
▼ Implementation
On attendant set power-up, the set is inhibited («Unplugged» position). The status of the group
to which the set belongs
(see § 3-2-2-1) is displayed on the screen.
To be operational, the attendant set must be changed over to «normal service» («Plugged
in» position). For this, press the «ON/OFF» fixed key
(see§3-1-1) .
Furthermore, from system management, it is possible to authorise, inhibit or control, by secret
code, access to the following facilities:
- group status: night,
- group status: day,
- group status: mode 1,
- group status: mode 2,
- modification of operating, connection, public, network and charging categories,
- date/time update,
- management of external abbreviated numbers,
- management of sets (creation, modification and deletion) /directory number,
- cost centre update,
- charging,
- out of service trunk display,
- trunk group book/remove (automatic/selective),
- direct seize locking,
- traffic overflow,
- users facilities management,
- entity status: night,
- entity status: day,
- status entity: mode 1,
- status entity: mode 2,
- ATT set routing tables,
- ATT group routing tables,
- entity routing tables,
- register DECT sets, permanent DECT sets,
- install DECT sets.