Alcatel 4035 - Page 71

Management from the attendant set
3BA 19875 ENAA - Ed. 02 - April 2000 - Alcatel 4035 - Attendant set 3-5
On pressing the « » fixed key, the initial menu is displayed:
Initial menu
Prog is intended for programming the environment of the attendant set.
WhoAml is used to display the identity of the attendant set.
AttGp? is used to display the number of the attendant group and the group call number.
Lang is used to select the display language on the attendant set.
Issue is used to know the version of the software supported by the PBX.
If the « » symbol is shown on the right of the screen, press the « » key. The following is
displayed:
Ring is used to program the call signal on the attendant set.
AutTrf is used to validate automatic transfer.
Test start the attendant set autotest.
[ i ]
programming:
- call m elody
- display contrast
- individual directory
- programmable keys
attendant set
identity
language
attendant group
number
group call
software
version
You're in Guide mode
Prog WhoAmI AttGp? Lang
Issue
number
call signal
on
attendant set
automatic
transfer
selftest of
attendant set
Ring AutTrf Test
You’re in Guide mode