Alcatel 4035 - Page 81

Management from the attendant set
3BA 19875 ENAA - Ed. 02 - April 2000 - Alcatel 4035 - Attendant set 3-15
Back is used to return to the initial menu.
-4
th
case: the ringing is deleted
Normal used to return to normal mode.
Delay used to modify the signalling by entering a delay.
Bip used to program a beep on call presentation.
Back is used to return to the initial menu.
3-1-3-8 Automatic transfer
The «automatic transfer» function is used to route a call to a free user immediately after user
numbering without the attendant carrying out the «transfer» operation.
On pressing the « » fixed key, followed by « » and «AutTrf» keys, the screen displays:
Apply confirms the halting of the «Automatic transfer» function.
Yes displays the screen used to activate automatic transfer.
After pressing the «Yes» key, the screen displays:
Apply confirms activation of the «Automatic transfer» function.
No displays the previous screen which is used to de-activate the automatic transfer.
[ i ]