Alcatel 4035 - Page 80

Chapter 3 Management from the attendant set
3-14 3BA 19875 ENAA - Ed. 02 - April 2000 - Alcatel 4035 - Attendant set
3-1-3-7 Programming the ringing cadence
On pressing the « » fixed key, followed by « » and «TypMel» keys, the screen displays:
-1
st
case: the ringing is in normal mode
The ring on the attendant set is programmed in normal mode (ringing starts on presentation
of a call on the attendant set).
Withou used to delete the ring.
Delay used to modify the signalling by entering a delay.
Bip used to program a beep on call presentation.
Back is used to return to the initial menu.
-2
nd
case: the ringing is in delayed mode
Withou used to delete the ring.
Normal used to return to normal mode.
Bip used to program a beep on call presentation.
Back is used to return to the initial menu.
-3
rd
case: the ringing is in delayed mode with beep
Withou used to delete the ring.
Normal used to return to normal mode.
Delay used to modify the signalling by entering a delay.
[ i ]