Management from the attendant set
3BA 19875 ENAA - Ed. 02 - April 2000 - Alcatel 4035 - Attendant set 3-19
The number of the trunk group to delete from reservation is completed in the form of a 3 digit
number entered via the keypad, as above. After dialling the digits, the pictogram associated with
the « » fixed key is de-activated and the following is displayed:
Next used to start the procedure for cancelling the reservation of another trunk
group over again (return to screen B).
Back returns to the initial screen.
If the number does not correspond to an existing trunk group, the «Value out of limits» display
is accompanied by an audible beep.
3-2-2 Programming functions («SERVICE» fixed key)
The different programming functions can only be accessed by pressing the «SERVICE» fixed key
when the attendant set is in idle position. The different programming operations described in this
chapter can be inhibited or locked by a password. This password, managed at system
management level, is requested during modification of a locked programming operation. The
description below does not take into account this password.
Pressing the «SERVICE» fixed key provides access to the following main menu (all authorised):
Pressing on the « » key, the following screen is displayed:
To Next Page
Loading...
