Alcatel GO FLIP User Manual

Set Up Your Phone 7
Charge Using the AC Adapter
1. Plug the charger into the charging port of your phone.
2. Plug the AC adapter into an electrical outlet.
 The indicator light illuminates when charging starts. The light goes off when the battery is fully
charged. Fully charging a battery may take up to three hours.
3. After charging, disconnect the phone from the charger.
 Unplug the AC adapter from the outlet, and remove the charger from the phone.
Charge Using a PC Connection
Before using a PC connection to charge your phone, ensure that the computer is turned on. Depending on
the type of connection, your phone’s battery may not charge.
1. Insert the small end of the USB cord into the charging port of your phone.

Alcatel GO FLIP Specifications

General

Internal Storage	4 GB
Expandable Storage	microSD up to 32 GB
Rear Camera	2 MP
Battery	1350 mAh
Operating System	KaiOS
SIM	Nano-SIM
Connectivity	Wi-Fi, Bluetooth
Network	4G LTE
Weight	118g
Dimensions	108.5 x 54.7 x 18.7 mm