Alcatel GO FLIP User Manual

Connections Settings 88
 The Bluetooth settings open.
Bluetooth Settings Operations
● Enable Bluetooth: Select the On icon to turn Bluetooth on.
 When enabled, confirmation appears for your phone to be discoverable by other devices.
Follow the onscreen instructions.
 To disable Bluetooth, select the Off icon .
● Visible to All: Select the the On or Off icon to enable this function.
 When enabled, your phone can be discovered by other devices.
 This setting is available when Bluetooth is enabled.
● My Phone’s Name: Check your phone’s current name.
● Rename My Phone: You can set the phone’s name as it appears to other device.
 Emoji cannot be used in a device name.
 This setting is available when Bluetooth is enabled.
● Devices in the Area: Check available devices for connecting.
 If the target device does not appear, press to search again.
 This setting is available when Bluetooth is enabled.
● Paired Devices: Make sure the other devices are set to be discovered. From Bluetooth settings,
select the device name in “Devices in the Area” and follow the onscreen instructions.
 Depending on the device, you may be required to enter or accept a passkey.
 If the target device does not appear, press to search again.
 This setting is available when Bluetooth is enabled.

Alcatel GO FLIP Specifications

General

Internal Storage	4 GB
Expandable Storage	microSD up to 32 GB
Rear Camera	2 MP
Battery	1350 mAh
Operating System	KaiOS
SIM	Nano-SIM
Connectivity	Wi-Fi, Bluetooth
Network	4G LTE
Weight	118g
Dimensions	108.5 x 54.7 x 18.7 mm