Alcatel IP1020P - Ring Tones

Alcatel IP1020 Administrator Guide ed1.0 22/58
Handset/Headset/Hands-free modes are activated, press the right arrow key (volume
key). Use then up and down keys to increase/decrease the volume.
To modify ringer or calendar events volume, please use Ring Settings submenu. In
this submenu you can select the ringtones to be used for internal and external calls, but
also their volume. Use up and doen keys to navigate between melody and volume, and
right/left to adjust the volume. Press Save softkey to store your settings, and Back to
return to previous screen.
Note: you can also adjust ring volume when the phone is in idle status by pressing the
right arrow key (volume key). Use then up and down keys to increase/decrease the
volume. Press Save or Back to store or discard your changes.
Similarly, you can modify the ringer volume when the handset is ringing due to an
incoming call, following the same procedure.
Note:
The volume can only be adjusted via handset interface. When you adjust ring volume to
0, the icon is displayed on the LCD. Press the Volume keys to adjust the volume,
and this icon will disappear.
3.2.2 Ring Tones
You can adjust the type and volume of the ring tone using the handset interface.
Press MenuSettingsAudioRing Settings
You have 15 different ring tones available which you can assign independently to
external calls, internal calls (ie, from other handsets registered to the base) and
calendar events.
Select which type you want to configure, and use right/left navigator keys to browse
through available melodies.
You can also adjust volume in this submenu, as explained in the previous Volume
section.
Press Save to store your settings, or Back to return to the previous screen.