1.1 Packing List
The following components are included in your package:
Alcatel IP1020P base station
Base power supply unit
IP20 handset, battery door and belt clip
2xAA batteries
IP20 charging cradle
IP20 power supply unit
Ethernet cable
Quick Start Guide and Connection Sheet
1.2 Assembling your system
This section introduces how to assemble your system with the components in the
packing list
Connect the network cable to the LAN
connector of your base unit. Plug the
other side of the cable to your PoE
compliant network switch.
If only a non-PoE switch is available,
then connect the power supply unit to
the jack located on the side of the base
unit, and then to the mains.
To Next Page
Loading...
