Alcatel IP1020 Administrator Guide ed1.0 43/58
4.2.5 Auto Answer
Auto answer allows an incoming call to be answered just by lifting the handset from its
charging cradle, without pressing any key.
This feature can be enabled/disabled on the handset interface, as follows:
Press MenuSettingsTelephonyAutoanswer
Use rignt/left navigation keys to select desired status and press Save softkey to store
your changes, or Back to return to the previous menu.
Notes:
When Auto Answer is enabled, you can release a call by simply putting the handset back
on its charging cradle.
A short time is elapsed between the moment you lift the handset off the cradle (or put
it back) and call set up (or release)
To Next Page
Loading...
