Alcatel IP1020P - Page 35

Alcatel IP1020 Administrator Guide ed1.0 35/58
To set the anonymous call via handset interface:
Go to MenuServicesAnonymous Call and press OK to enter the configuration
page.
Use navigation keys to select the desired account (line) to be anonymous, and press OK
or Select softkey.
Use right/left navigation keys to enable/disable the anonymous call function.
Press down key then enable/disable the anonymous rejection function with right/left
navigation keys.
Press Save softkey to store your changes, or Back to return to the previous menu.
Notes:
To manage features described above related to Anonymous Calls and Rejection codes
your handset needs to be the master for the selected account (line). If you are not the
master, then you will be able to see service status, but will not be able to modify it.
To set the anonymous call service via Web interface, you can login either as an
administrator, or as the user of a particular handset.
Choose System Handset Management.
If you logged in as an admin, choose the handset you wish to configure by pressing the
Edit button.