A 30
Alcatel Vacuum Technology France --- IPUP A100 Instruction manual
2 / 2
IPUP A100 monitoring system
MONITORING SYSTEM
CHARACTERISTICS
l Microprocessor controlled.
l Parameters and messages are displayed on the hand-held remote
control.
l Memorization of the last ten warnings and hazards.
l RS 232 --- RS 485 --- Network links.
Note : the monitoring system can be interfaced with the process tool
via the Amat SPI connector or the RS 232 / 485 connector.
Electrical / electronic cabinet
Sensors
Actuators
(valves)
Indicator lights
Hand held
display module
Amat SPI connector
Mains
Converter
RS 232 / 485 connector
MAIN FUNCTIONS
l Motor protection.
l Pump temperature monitoring and control.
l Exhaust pressure monitoring (P version only).
l Maintenance time control.
To Next Page
Loading...
