Alcatel IPUP A100 - Pump Does Not Start - IPUP A100 Without Hand Held Display Module

D 50
1 / 1
Alcatel Vacuum Technology France --- IPUP A100 Instruction manual
Pump does not start.
IPUP A100 without hand held
display module
NO
No 24 V between Amat SPI
connector pins 1--2
l Connect 24 V. (see B 60)
INCIDENT CAUSE TROUBLESHOOTING
NO
No main power
l Check power supply.
NO
RT1 switch in position 0
l Switch to positon 1.
Other problem
l Call your Alcatel Service
Representative.
Pump does not start
G
B
0
0
5
4
8