Alcatel IPUP A100 - Amat Smart Pump Interface Connection

CAUTION
!
B 60
1 / 5
Alcatel Vacuum Technology France --- IPUP A100 Instruction manual
Amat smart pump interface
connection
Dry contact outputs are rated 50 V -- 1 A max.
Over voltage and over current can cause internal electrical
damages.
MonitorSPIcontactvoltagebelow50Vandcurrentbelow1A.
The remote control function allows:
l control of pumping functions START/STOP and variable rotation
speed,
l monitoring the status of dry contact outputs (50 V--- 1 A).
These contacts can be monitored or used by a system external to the
pump.
AMAT SPI CONNECTOR
LOCATION
IPUP A100 pump warnings and hazards are monitored on the SPI
connector with exception of maintenance warnings.
Remote control connection is realized with the Amat SPI connector
located at the rear of the pump.
Rear panel
Amat SPI connector
16 pins
G
B
0
0
5
2
9