Alcatel IPUP A100 - Page 93

D 90
2 / 2
Alcatel Vacuum Technology France --- IPUP A100 Instruction manual
Fault message display ---
Temperature problem
Pump is stopped and displays a
hazard
l Check the water supply.
Pump temperature is higher than
hazard threshold
Pump temperature reaches
temperature control setting value
Hazard
D15: INTERNAL T° HIGH
+/-- 10°C but the display is
0 or 170°C
INCIDENT CAUSE TROUBLESHOOTING
l Call your Alcatel Service
Representative.
NO
Cooling problem
Other problem
l Call your Alcatel Service
Representative.
G
B
0
0
5
5
2