ALCON ACP24 - Backup;Restore and Reset to Factory Default Settings; Save a Copy of Current Settings; Restore Saved Settings from a File; Revert to Factory Default Settings

23
Backup/Restore and Reset to factory default Settings–
In this section, you can Backup/Restore Setting and Revert to Factory
Default Settings:
 Save A Copy of Current Settings – Click Backup, the system will
prompt you where to save the backup file. You can choose the directory to
save your configuration file.
 Restore Saved Settings from A File – Here you can restore the
configuration file from where you previously saved.
 Revert To Factory Default Settings – Be very carefully before restore
system back to default since you will lose all current settings immediately.
If you act the function, the IP address will restore the establishing value
situation.
192.168.1.1 in the IP Address field and 255.255.255.0 in the Subnet
Mask field,