ALDI Workzone Titanium Xfinity Series User Manual

12
12
AFTER SALES SUPPORT
1300 889 028 (toll free)
MODEL No.:
CLP18WA.9 • 2323 • 05/2019
e-mail:
info.aldi@positecgroup.com
8.2 Adjusting the Torch Head (2) position.
Adjust the torch head (2) position by rotating the pivoting head
from the pivot joint (3). (See Fig. C) The torch pivoting head rotates
to provide light in the range of -10° to 100°.
8.3 Carrying and Suspending the torch
CAUTION: When the LED Torch hangs by the belt clip (10)
or the hanging hook (9). Do not shake the LED Torch or the
object from which it hangs. Do not hang the torch from any
electrical wires or anything that is not secure. Personal injury
or property damage may occur.
CAUTION: Only use the belt clip (10) or the hanging hook (9)
for hanging the LED Torch. The belt clip (10) and hanging
hook (9) are not intended to support additional weight. Do
not attach or hang anything additional to the torch or risk
breakage may occur.
CAUTION: Do not use the belt clip (10) or hanging hook (9) to
reach with or to support your weight in any situation.
8.4 Hanging hook (9)
The torch may be carried or hung by the hanging hook (9) (See Fig.
D1). When not in use, the hanging hook (9) may be folded down
(See Fig. D2).
C

ALDI Workzone Titanium Xfinity Series Specifications

General

Brand	ALDI
Model	Workzone Titanium Xfinity Series
Category	Power Tool
Language	English