13
13
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
info.aldi@positecgroup.com
CLP18WA.9 • 2323 • 05/2019
MODEL No.:
CLP18WA.9 • 2323 • 05/2019
8.5 Belt clip (10) (See Fig. E)
WARNING! To reduce the risk of serious personal injury,
ensure the screw holding the belt clip (10) is secure.
The side belt clip (10) is used to assist to clip the torch to your waist
belt while working. To install, insert the assembly screw through the
belt clip screw hole into the retaining hole on the torch, and using a
philips head screwdriver (not supplied), tighten the screw by turning
in a clockwise direction
NOTE: The belt clip (10) can be assembled onto either side of the
LED torch.
IMPORTANT: When attaching or replacing the belt clip (10), use
only the assembly screw that is provided. Be sure to securely tighten
screw.
D1 D2
E
9
9
To Next Page
Loading...
Need help?
General
