14
14
AFTER SALES SUPPORT
1300 889 028 (toll free)
MODEL No.:
CID180XA.9 • 2323 • 05/2019
e-mail:
info.aldi@positecgroup.com
7. Assembly
7.1 Inserting A Bit Holder, Socket Or Screwdriver Bit
(See Fig. A)
Pull the hex drive (8) sleeve (a) forward. Fully insert the desired bit
into the hex drive (8) and release the sleeve (a).
NOTE: To ensure the bit is secure, try pulling the bit after releasing
the sleeve (a) to make sure the bit is fully locked in the hex drive (8).
7.2 Removing A Bit Holder, Socket Or Screwdriver Bit
(See Fig. B)
Pull the hex drive (8) sleeve (a) forward. Remove the bit out of the
hex drive (8) and release the sleeve (a).
A B
a a
To Next Page
Loading...
