ALDI Workzone Titanium Xfinity Series User Manual

5
5
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
info.aldi@positecgroup.com
CID180XA.9 • 2323 • 05/2019
MODEL No.:
CID180XA.9 • 2323 • 05/2019
1. Application
20V Li-ion Cordless Impact driver
2. Package Content List
First time users or inexperienced operators pay particular attention to the
operation of the 20V Li-ion Cordless Impact Driver, including details of
starting and stopping and correct use of the 20V Li-ion Cordless Impact
Driver on pages 14-19, as well as the maintenance instructions on page 20.
Intended use of 20V Li-ion Cordless Impact Driver
NOTE: This product is for private domestic DIY use only. It is not suitable for
commercial or trade use.
This 20V Li-ion Cordless Impact Driver is used for fastening and loosening of bolts,
nuts and various threaded fasteners. This tool is not intended for use as a drill.
The tool is to be used only for its prescribed purpose. Any other use is deemed to
be a case of misuse.
1 x 20V Li-Ion Cordless Impact Driver
1 x Belt clip + assembly screw (not tted)
1 x 50mm drill bit
1 x Instruction manual
1 x Warranty Card & Certicate
• Remove all packing materials
• Ensure all parts on the
contents list are present
• Check the appliance, and all
accessories for transportation
damages
WARNING! Please read and understand this instruction manual
before use and keep it for your future reference. Your product
should only be passed on together with this instruction manual.
WARNING! To reduce risk of injury, only use the supplied 20V Li-
Ion battery and charger included in this kit or any 20V Li-Ion ALDI
Xnity Plus range of 20V Li-Ion battery packs. Other type of battery
packs may burst causing personal injury and damage. The battery
pack must be charged using with ALDI Xnity Plus 20V Li-Ion battery
chargers.

ALDI Workzone Titanium Xfinity Series Specifications

General

Brand	ALDI
Model	Workzone Titanium Xfinity Series
Category	Power Tool
Language	English