9
9
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
info.aldi@positecgroup.com
ACG118PA • 2323 • 05/2019
MODEL No.:
ACG118PA • 2323 • 05/2019
NOTE: To achieve longer USB charger life, don’t plug in mobile
phones or other devices that exceed charging current on the battery
charger’s label. To charge, insert the USB plug into one of the
charging ports (3).
7.3. Charging Turn On Button (1)
Your charger is equipped with a charging turn on button (1).
First install the USB charger onto a battery pack, then connect your
USB charging cable end into one of the charging ports (3). Press the
charging turn on button (1) to start charging. The battery power
indicator (5) will illuminate for three seconds to show the battery
power. During charging, press the charging turn on button (1) to
check the battery power remaining.
8. Maintenance
There are no serviceable parts inside your battery charger.
Any adjustment, servicing or maintenance should be performed by
an authorized repair agent, so do not attempt to repair your battery
charger.
The USB Charger requires no additional lubrication or maintenance.
Never use water or chemical cleaners to clean your USB Charger.
Wipe clean with a dry cloth. Always store your USB Charger in a dry
place.
9. Warranty
Your new WORKZONE
®
TITANIUM 20V Li-Ion USB Charger will more
than satisfy your expectations.
It has been manufactured under stringent WORKZONE
®
TITANIUM
Quality Standards to meet superior performance criteria.
You will find your new 20V Li-Ion USB Charger easy and safe to
operate, and, with proper care, it will give you many years of
dependable service.
CAUTION. Carefully read through this entire instruction manual
To Next Page
Loading...
Need help?
General
