17
17
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
info.aldi@positecgroup.com
CSC165XA.9 • 2323 • 05/2019
MODEL No.:
CSC165XA.9 • 2323 • 05/2019
previous pages before using the 20V Li-Ion 165mm Circular Saw.
Treat the battery pack with care and within the guidelines of this
manual.
If the battery pack does become immersed in water or any fluids,
or is subject to a severe drop or it does not operate within the
guidelines of this manual or the supplied manual, immediately STOP
using the battery pack and have it checked.
7. Assembly
NOTE: Before using the tool, read the instruction manual
carefully.
7.1 To remove the battery pack (See Fig. A1)
Depress the battery pack release button (17) firmly, then slide the
battery pack (16) out away from the tool.
7.2 To install the battery pack (See Fig. A2)
Slide the fully charged battery pack (16) onto the tool with
sufficient force until it clicks into position.
A1 A2
To Next Page
Loading...
Need help?
General
