Alesis STRIKE - Trigger Settings; SysEx; OS; Factory Reset; Restore Defaults

29
Trigger
Setting Description
V
alues/Settings
Trig Sensitivity
This determines the overall sensitivity of all triggers connected to
the module’s trigger inputs.
Low
Medium
High
HiHat
This determines whether the hi-hat MIDI note will be sent with or
without a MIDI CC message (CC#4).
Note+CC#4
Note Only
HiHat Splash
This determines whether or not the hi-hat “splash” note (generated
by quickly pressing then releasing the pedal) will be sent.
Sent, Not Sent
Cymbal Choke
This determines whether or not the cymbal “choke” note
(generated by grabbing the cymbal’s choke strip) will be sent.
Sent, Not Sent
SysEx
To send all trigger settings from the module as a SysEx file (over the USB port and MIDI Out), press
Enter.
To send a SysEx file to the module (over the USB port and MIDI In), send it any time from your computer
or external MIDI device.
OS
Setting Description
Trigger OS
This is the version of the trigger firmware.
DSP OS
This is the version of the module’s firmware.
Factory Reset / Restore Defaults
To reset to the default settings in Trigger Mode and in the Utility menu, press and hold the Stop and
Enter buttons while powering on the Strike Module.