- 38 -
MAC Address - The wireless station's MAC address that you want to add.
Data Rate -
S
e
l
e
c
t
t
r
a
n
sm
i
ss
i
on
data rate from the
drop
down m
e
nu
. Data rate can be
a
u
t
o
-
s
e
l
e
c
t
e
d
,
1Mbps to 54Mbps
or
M
C
S.
Set Security - There are two wireless security modes supported by the WDS: WEP (Wired
Equivalent Privacy), and WPA2 (Wi-Fi Protected Access 2).
Encryption – Use drop down menu to configure WDS security, you can select it from
None, WEP 64-bits, WEP 128-bits, or WPA2 (AES).
WEP Key Format – Hexadecimal and ASCII formats are provided here. Hexadecimal
format stands for any combination of hexadecimal digits (0-9, a-f, A-F) in the specified
length. ASCII format stands for any combination of keyboard characters in the specified
length. 64-bit - You can enter 10 hexadecimal digits (any combination of 0-9, a-f, A-F,
zero key is not promoted) or 5 ASCII characters. 128-bit - You can enter 26 hexadecimal
digits (any combination of 0-9, a-f, A-F, zero key is not promoted) or 13 ASCII
characters.
Encryption Key - Select which of the four keys will be used and enter the matching
WEP key that you create. Make sure these values are identical on all wireless stations in
your WDS network
Pre-Shared Key Format - You can enter chose either Passphrase (8 ~ 63 characters)
or HEX(64 Characters).
Pre-Shared Key - Enter the matching WEP key that you create. Make sure these values
are identical on all wireless stations in your WDS network
Comment - A simple description of the wireless station.
Be sure to click the Apply Changes button to save your settings on this page
Current WDS AP List -
Display
s the
r
e
g
i
s
t
e
r
e
d
AP
s that are
a
ll
o
w
e
d
to
link
to
t
h
i
s
W
L
A
N
B
ro
a
db
a
nd
R
ou
t
e
r
.
To Next Page
Loading...
