ALGE-Timing Timy3 W - Printer Paper Replacement; Changing Paper (Design 2); Changing Paper (Old Design)

Manual
Timy3 - General
-14-
3 Printer
The Timy3 WP has an integrated thermal printer. We recommend using our ALGE-TIMING pa-
per as it is best suited. You can recognize it by the ALGE-TIMING logo print on the reverse side,
available with your ALGE-TIMING representative.
3.1 Change of Paper for Timy3 WP (Design 2)
• press printer hood opener (see picture on the right)
• lift printer hood
• take out paper axis
• place the axis inside a new paper roll
• insert paper roll with axis into Timy3
• thread paper through tear-off edge
• close printer hood
3.2 Change of Paper for Timy3 WP (old
Design)
• open printer hood
• take out paper axis
• place the axis inside the new paper roll
• insert paper roll with axis into Timy3
• thread paper through tear-off edge
• close printer hood