Need help?Do you have a question about the ALGE-Timing Timy3 W and is the answer not in the manual?
Covers basic operation, safety precautions, intended use, and power supply guidelines.
Instructions for device cleaning, liability limitations, and proper equipment disposal.
Declares conformity to R&TTE and harmonized technical standards.
Labels for physical parts like printer, keypad, display, and connection ports.
Settings for delay, 0.1s-correction, and trigger edges.
Beep, TED-RX, channel pattern, WTN delay, enable/disable, usage, and pulse hold.
Describes the features and specifications of Timy3 W and Timy3 WP models.
Lists and briefly describes various timing programs available for the Timy3.
Explains the layout, operation, and functions of the Timy3 keypad and its keys.
Adjusting display backlight for visibility and power saving.
Step-by-step guide to select the user interface language.
Instructions for turning the Timy3 on.
Procedures for safely turning the Timy3 off.
Details on internal and external power sources for the device.
Information on battery types, capacity, and expected operating duration.
Guidelines for charging rechargeable batteries and using the charging switch.
Step-by-step instructions for replacing paper in Design 2 models.
Step-by-step instructions for replacing paper in older Timy3 models.
How to synchronize the Timy3 using a GPS receiver.
Syncing the Timy3 with other timing devices via channel C0.
Using cables to send synchronization signals between devices.
Explains Sync Off, Passive, Active, and Active Per Minute modes.
Details the nine independent timing channels and their precision.
Manages timing parameters to prevent impulse issues and ensure accuracy.
Visual representation of delay and block time concepts.
Procedure for updating the Timy3 firmware using a USB connection.
Details available in the Info Menu, such as version, serial numbers, and battery status.
How to navigate the Timy3 menu system using the device buttons.
Options for printing results, overall rankings, and class-specific lists.
Configuration for precision, rounding, and changing heats.
Settings for automatic start number progression at start and finish.
Runtime display format, language selection, and automatic time settings.
Resetting to factory defaults, managing programs, and clearing memory.
Manual adjustment for leap seconds to maintain accurate time.
Setting automatic programs and re-synchronizing the device.
Setup for delay times, 0.1s-correction, and trigger edges for internal channels.
Visual examples of falling and rising edge signal triggering.
Control for audio beep alerts and TED-RX multichannel reception.
Enabling or disabling individual timing channels.
Explains channel status display and associated function keys.
Configuring WTN delay and enabling/disabling channels permanently or sensitively.
Socket configuration for WTN devices and pulse hold interval settings.
Settings for running tenth, delay time 1, and delay time 2.
Configuration options for display backlight (ENERGY SAVE, ON, AUTOMATIC).
Settings for connecting and controlling external display boards.
Configuration for serial communication and GSM modem parameters.
Options for printer mode, start time printing, line feed, logo, and daytime printing.
Changing the active Timy3 program and accessing program-specific settings.
General principles and facts about the WTN radio network.
Switching the WTN module on/off and monitoring its operational state.
Understanding transmission status and configuring radio power, RS232, and edge modes.
Setting up teams and configuring WTN timing channels via sockets.
Broadcasting WTN parameters and viewing network statistics.
How to activate and deactivate the keypad lock to prevent accidental entries.
Explanations for common operational messages and their causes.
Details on the device's internal hardware components and display.
Information on various interfaces, ports, and the integrated WTN radio module.
Specifications for power sources and battery operating duration.
Details on the printer, physical size, and weight of Timy3 models.
Detailed pin configuration for the USB interface.
Pin details for the device charger connection.
Comprehensive pin assignment for the ALGE-TIMING Multiport.
Banana plug assignments for display boards and start/stop channels.
Detailed pin configuration for the photocell socket.
Output format, bit rate, and transmission protocol for RS232 communication.
Interpretation of the structure and meaning of RS232 data strings.
Lists available commands, their syntax, parameters, and provides examples.
Detailed explanation of specific command parameters and their functions.
Commands for establishing serial connections and synchronization between Timy devices.
Understanding device communication status and command acknowledgement.
Information on the RS485 interface for specialized applications.
Output format and data structure for external display boards.
Describes the possible uses and applications of the USB interface.
General| Category | Handhelds |
|---|---|
| Channels | 3 |
| Display | LCD |
| Power Supply | 4 x AA batteries or external power supply |
| Interface | RS232, USB |
| Event Inputs | 3 |
To Next Page