ALGE-Timing Timy3 W - Declaration of Conformity; Product Compliance and Standards

Manual
Timy3 - General
-3-
Declaration of Conformity
We declare that the following products comply with the requirements of the listed standards.
We,
ALGE-TIMING GmbH
Rotkreuzstrasse 39
A-6890 Lustenau
declare under our sole responsibility, that the timing device
Timy3 W-F and Timy3 WP-F
complies with the following standards/normative documents and in case of intended use com-
plies with the basic requirements of R&TTE 1999/5/EC:
Telecommunication (TC)terminal device
Short Range Device
When used as intended complies with the basic requirements of §3 and the other relevant Provisions of
the FTEG (article 3 R&TTE 1999/5/EC).
Health and safety according to §3(1)1. (article 3(1)a))
Applied harmonized standards…
EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
Protection requirements with regard to electromagnetic compatibility §3 (1) 2, (article 3 (1) b).
Applied harmonized standards
EMC: EN301 489-17 v2.1.1. (2009-05) v2.2.1 (2012-09)
EN 300 328 v1.7.1 (2006-10) v1.9.1 (2015-02)
EN 55022 : 2010 / AC : 2011
EN 55024 : 2010 / A1: 2015
EN 61000 3-2:2014
EN 61000 3-3:2013
Additional Information:
The product herewith complies with the requirements of the Low Voltage Directive 73/23/EEC, also the
EMC Directive
2004/108EG and accordingly carries the CE-marking.
Lustenau, 2017-03-22 ALGE-TIMING GmbH
Albert Vetter
(General Manager)