Manual
Timy3 - General
-8-
1.2 Timy3 Software
Available programs for the Timy3:
Stopwatch: universal timing program which is suitable for several heats (run/total time)
Backup: to measure time of day times (e. g. as backup-system or as time reference
for the computer)
PC-Timer: to measure time of day times with simultaneous output of the running time
in 1/10 seconds via the RS232 interface; ideal as an accurate timing device
for the computer
LapTimer: timing program with run times and lap times (e. g. for motor sport)
TrackTimer: timing program for events with several lanes, e. g. athletics and swimming
Training Lite: universal training software (several intermediate times are possible)
Training REF: training software with reference run (several competitors on course)
Speed: speed measurement
Commander: terminal for diverse subprograms (see manual)
CycleStart: program for track cycling with countdown and lap counter
Terminal: terminal for judges (e. g. gymnastics)
Track + Field: for measuring the wind speed with anemometer WS2, to control a concen-
tration clock and infield display board
Parallel-Diff: timing for parallel slalom (difference time of both slopes)
Dual Timer: timing of two separate courses
Timeout: timing with timeout, also applicable for show jumping (with start countdown)
Swim Trainer: training program for swimming
Jumping: training program for jump trials, measures jumping height on the basis of
time between jump and landing on a contact mat (several subprograms)
Speed-Climbing: timing for parallel competitions at speed climbing with false start
Start-Liner: to control Startclocks ASC3 or display boards D-LINE when using individual
start time (e.g. Gunderson start)
Parallel-Start: to control and input start doors for opening with a different time delay
TV-Timer: simple timing program for controlling a display board or TV time flashes
Voting: radio judging console (WTN) for judges, voting, etc. (e.g. ski jumping)
Safe Driving 2: to control a display board and speed measurement for driver training
CC False Start: false start detection for cross country skiing sprint events
1.3 Driver Installation
For installation of drivers, separate manuals are available. You can download them from our
website www.alge-timing.com
or contact your ALGE-TIMING representative.
To Next Page
Loading...