Replacing the stability foot
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working
inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Procedure
1. Place the computer on a clean and flat surface with the bottom cover facing up.
2. Align the tabs on the stability foot with the slots on the bottom cover and snap the stability foot to lock it in place.
3. Turn the computer over and place it in upright position.
16
To Next Page
Loading...
