Alienware Aurora R6 - Removing the hard-drive cage; Prerequisites; Procedure

Removing the hard-drive cage
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working
inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Procedure
1. Remove the screws that secure the hard-drive cage to the chassis.
2. Lift the hard-drive cage off the chassis.
a. chassis
b. #6-32x1/4'' screws (2)
c. hard-drive cage
Prerequisites
1. Remove the left-side cover.
2. Remove the
3.5-inch hard drive.
40