Alienware Aurora R6 - Removing the right-side cover; Procedure

Removing the right-side cover
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working
inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Procedure
1. Carefully pry around the edges of the right-side cover from the chassis.
a. chassis
b. right-side cover
2. Disconnect the lighting cable from the right-side cover.
3. Lift the right-side cover off the chassis.
19