Alienware Aurora R6 - Replacing the rear trim cover; Procedure; Post-requisites

Replacing the rear trim cover
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working
inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Procedure
Align the tabs on the rear trim cover with the slots on the chassis and snap the cover to lock it in place.
Post-requisites
1. Replace the top cover.
2. Replace the
right-side cover.
3. Replace the left-side cover.
87