Alienware AW5520QF - Power Management Modes

About your monitor | 19
Power management modes
If you have a VESA DPM™ compliant displ
ay card or software installed on your
computer, the monitor can automatically reduce its power consumption when
not in use. This is referred to as Power save mode*. If the computer detects input
from the keyboard, mouse, or other input devices, the monitor automatically
resumes to function. The following table shows the power consumption and
signaling of this automatic power saving feature:
VESA
modes
Horizontal
sync
Vertical
sync
Video Power
indicator
Power
consumption
Normal
operatio
n
Active Active Active Blue 390 W
(maximum)**
100 W (typical)
Active-off
mo
de
Inactive Inactive Inactive Off Less than 0.5 W
Switch off - - - Off Less than 0.3 W
Power Consumption P
on
84.75 W
Total Energy Consumption (TEC) 262.12 kWh
* Zero power consumption in OFF mode can only be ac
hieved by disconnecting
the main cable from the monitor.
** Maximum power consumption with max luminance, and USB active.
This document is informational
only and reflects laboratory performance. Your
product may perform differently, depending on the software, components and
peripherals you ordered and shall have no obligation to update such information.
Accordingly, the customer should not rely upon this information in making
decisions about electrical tolerances or otherwise. No warranty as to accuracy or
completeness is expressed or implied.
NOTE:
P
on
: Power consumption of On mode measured with reference to
Energy Star test method.
TEC: Total energy consumption in kWh measured with reference to
Energy Star test
method.