Operating the monitor | 41
Using the On-Screen Display (OSD) menu
Accessing the menu system
NOTE: If you change the settings and then either proceed to another
menu or exit the OSD menu, the monitor automatically saves those
changes. The changes are also saved if you change the settings and then
wait for the OSD menu to disappear.
1. P
ress the Menu button on the monitor or remote control to display the main
menu.
2. Use the up or down buttons to move between the setting options. As you
move from one icon to another, the option name is highlighted.
3. U
se the right button to enter the submenu.
4. U
se the directional buttons to make your changes.
5. Pr
ess the OK button to confirm your changes.
6. Pr
ess the Back or left button to return to the previous menu, or press the
Exit button to close the OSD menu.
NOTE: See the following table for a complete list of the options available
for the monitor.
NOTE: If you use the remote control to access the OSD menu, the
directional buttons below the menu will not appear on the screen.
To Next Page
Loading...
