Operating the monitor | 51
OLED Panel
Maintenance
The OLED Panel Maintenance menu prevents the screen
from image retention by offering these functions:
• Pixel Refr
esh: To reduce temporary image retention on the
screen, you can manually activate this function after using
the monitor for a long period of time. Alternatively, the
function will activate automatically when you have used the
monitor for several hours. The process takes approximately
5 minutes to complete.
NOTE: The po
wer LED indicator flashes green during the
refresh process.
• Panel Refresh: To prevent permanent image retention
caused by static content when you use the monitor for a
long period of time, you can manually activate this function
to refresh the pixels. Alternatively, the function will activate
automatically when the accumulated usage time exceeds
the factory default setting. The process takes approximately
an hour to complete.
NOTE: The
power LED indicator flashes green and then turns
to blinking red during the refresh process.
Reset Display Resets all settings under the Display menu to the fact
ory
defaults.
Audio
Volume Allows you to set the volume level of headphone and speaker
output.
Use the directional buttons (up and down) to adjust the
volume level from
0 to 100.
Reset Audio Resets all settings under the Audio menu to the factory
de
faults.
To Next Page
Loading...
