System Setup | 103
Boot Sequence
This feature allows you to change the boot sequence for devices.
Boot Options
• Diskette Drive — The computer attempts to boot from the floppy drive. If no
operating system is on the drive, the computer generates an error message.
• Hard Drive — The computer attempts to boot from the primary hard drive. If no
operating system is on the drive, the computer generates an error message.
• CD/DVD/CD-RW Drive — The computer attempts to boot from the optical drive. If
no disc is in the drive, or if the disc is not bootable, the computer generates an error
message.
Boot Menu
Use the up- or down-arrow keys to change the boot device priority. You can choose from:
Hard Drive
USB Storage
CD/DVD/BD
Removal Devices
Network
Exit Menu
Exit Saving Changes Allows you to exit System Setup and save your
changes.
Save Change Without Exit Allows you to remain in System Setup and save
your changes.
Exit Discarding Changes Allows you to exit System Setup and load
previous values for all Setup items.
Load Optimal Defaults Allows you to load default values for all Setup
items.
Discard Changes Allows you to load previous values for all Setup
items.
Book.book Page 103 Thursday, April 19, 2012 2:38 PM
To Next Page
Loading...
