Removing the Wireless Mini-Card | 89
Removing the Wireless
Mini-Card
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before You Begin" on page 9. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
NOTE: Dell does not guarantee compatibility or provide support for wireless
Mini-Cards from sources other than Dell.
If you ordered a wireless Mini-Card with your computer, the card is already installed.
Your computer has one half Mini-Card slot which supports a Wireless Local Area Network
(WLAN) + Bluetooth combo card.
Prerequisites
1 Remove the battery pack. See "Removing the Battery Pack" on page 12.
2 Remove the base cover. See "Removing the Base Cover" on page 14.
Procedure
1 Disconnect the antenna cables from the connectors on the wireless Mini-Card.
1 wireless Mini-Card 2 antenna cables (3)
49
1
2
Book.book Page 89 Thursday, April 19, 2012 2:38 PM
To Next Page
Loading...
