Rockwell Automation Publication 1734-UM013C-EN-P - August 2010 143
Specifications Appendix D
EFT/B immunity IEC 61000-4-4:
±3 kV at 5 kHz on signal ports
Surge transient immunity IEC 61000-4-5:
±1 kV line-line (DM) and ±2 kV line-earth (CM) on signal
ports
Conducted RF immunity IEC 61000-4-6:
10V rms with 1 kHz sine-wave 80%AM from
150 kHz…80 MHz
Table 10 - 1734-IB8S and 1734-OB8S Certifications
Certification Value
Certifications: (when product is marked)
(1)
(1) See the Product Certification link at http://www.ab.com for Declaration of Conformity, Certificates, and other
certification details.
c-UL-us Listed Industrial Control
Equipment, certified for US
and Canada.
See UL File E65584.
UL Listed for Class I, Division 2
Group A,B,C,D Hazardous
Locations, certified for U.S.
and Canada.
See UL File E194810.
CE European Union 2004/108/EC
EMC Directive, compliant with:
EN 61326-1; Meas./Control/
Lab., Industrial Requirements
EN 61000-6-2; Industrial
Immunity
EN6100-6-4; Industrial
Emissions
EN 61131-2; Programmable
Controllers (Clause 8, Zone A
& B)
Ex European Union 94/9/EC ATEX
Directive, compliant with:
EN 60079-15; Potentially
Explosive Atmospheres,
Protection "n"
EN 60079-0; General
Requirements
II 3 G Ex nA IIC T4X
C-Tick Australian
Radiocommunications Act
compliant with AS/NZS CISPR
11, Industrial Emissions
TÜV TÜV Certified for Functional
Safety
(2)
Capable of SIL 3 (IEC
61508, IEC 62061) and Pl e /
Category 4 (ISO13849-1)
ODVA ODVA conformance tested to
CIP Safety on DeviceNet
specifications
(2) When used with specified firmware revisions.
Table 9 - 1734-IB8S and 1734-OB8S Environmental Specifications
Attribute Value
To Next Page
Loading...
