Rockwell Automation Publication 1756-UM001M-EN-P - February 2012 177
Using the PhaseManager Tool Chapter 11
Minimum System
Requirements
To develop PhaseManager programs, you need the following:
• A ControlLogix controller at firmware revision 16.0, or later
• A communication path to the controller
• RSLogix 5000 software, version 16.0 or later
To enable PhaseManager support, you need either the Full or Professional edition
of RSLogix 5000 software, or RSLogix 5000 with PhaseManager software
(catalog number 9324-RLDPMENE).
To Next Page
Loading...
