58 Rockwell Automation Publication 1756-UM001M-EN-P - February 2012
Chapter 3 Start Using the Controller
The firmware upgrade begins.
Allow the firmware upgrade to complete without interruption.
When the firmware upgrade is complete, the Who Active dialog box
opens. You may complete other tasks in RSLogix 5000 software.
Set the Communication Path
To get online with the controller, you must specify a communication path in
RSLogix 5000 software. You can specify the communication path after you’ve
created the RSLogix 5000 program.
Complete these steps to specify the communication path after you have created
your program.
1. Click Who Active.
To Next Page
Loading...
