Rockwell Automation Publication 1756-UM001M-EN-P - February 2012 89
ControlLogix System and Controllers Chapter 4
Additional Resources
These documents contain additional information specific to the ControlLogix
system design and selection.
You can view or download publications at http://www.rockwellautomation.com/
literature. To order paper copies of technical documentation, contact your local
Rockwell Automation distributor or sales representative.
Resource Description
ControlLogix Selection Guide, publication 1756-SG001 Provides methods for determining what ControlLogix components are required for your
system.
SERCOS Motion Configuration and Startup User Manual, publication
MOTION-UM001
Explains the configuration of Sercos and analog motion applications.
Motion Coordinated Systems User Manual, publication MOTION-UM002
Explains the configuration of coordinated motion applications.
CIP Motion Configuration and Startup User Manual, publication MOTION-UM003 Explains the configuration of Integrated Motion on the EtherNet/IP network.
ControlLogix Enhanced Redundancy System User Manual, publication 1756-UM535 Explains the design and configuration of enhanced redundancy systems.
ControlLogix Redundancy System User Manual, publication 1756-UM523
Explains the design and configuration of standard redundancy systems.
Using ControlLogix in SIL2 Applications Safety Reference Manual, publication
1756-RM001
Lists components for use in SIL2 applications and provides general configuration and
application requirements.
ControlLogix SIL2 System Configuration Using RSLogix 5000 Subroutines Application
Technique, publication 1756-AT010
Explains the configuration of SIL2-certified fault-tolerant systems that are configured by
using RSLogix 5000 subroutines.
ControlLogix SIL2 System Configuration Using SIL2 Add-On Instructions Application
Technique, publication 1756-AT012
Explains the configuration of SIL2-certified fault-tolerant systems that are configured by
using RSLogix 5000 Add-On Instructions.
To Next Page
Loading...
