Allen-Bradley 1756 Series User Manual

96 Rockwell Automation Publication 1756-UM013B-EN-P - October 2019
Chapter 5 Configure and Replace Safety Modules
Scenario 1 - Replacement Device is Out-of-box and Safety Signature Exists
1. Remove the old I/O device and install the new device.
2. Right-click the replacement safety I/O device and choose Properties.
3. On the General category, click to the right of the safety network
number to open the Safety Network Number dialog box.
4. Click Set.

Allen-Bradley 1756 Series Specifications

General

Series	1756
Brand	Allen-Bradley
Category	Control Unit
Product Type	Programmable Logic Controller (PLC)
Communication Options	EtherNet/IP, ControlNet, DeviceNet
I/O Modules	Digital, Analog, Specialty
Programming Software	Studio 5000
Memory	Varies by processor
Operating Temperature	0 to 60°C (32 to 140°F)
Certifications	UL, CE, ATEX
Processor Options	ControlLogix, CompactLogix