Allen-Bradley 1770-SB - Connection to PLC-2, PLC-3, and Series 7100 CNCs

Installation
Chapter 3
32
Figure 3.1
Connection
to a PLC Programmable Controller
POWER
PLC Processor
Program
Panel
Interface
Module
10376
Cassette Recorder Interconnect Cable
(Cat. No. 1774TD)
PLC-2 Family and PLC-3 programmable controllers and series 7100
CNCs require an industrial terminal system connected between the
controller and the recorder. Connect the industrial terminal system to the
controller as described in the Industrial Terminal Systems User’s Manual,
publication 1770-805. Connect the recorder to the industrial terminal
system using the following procedure (Figure 3.2):
Figure 3.2
Connection
to an Industrial T erminal System
POWER
10378
PLC2 Family
Processor or
Series 7100 CNC
PLC3 Processor
Channel C
Digital Cassette
Recorder Cable
(Cat. No. 1772TH)
Connection to PLC2 Family and
PLC3 Programmable Controller
and Series 7100 CNCs
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com