Chapter
1
11
Introduction
The Data Cartridge Recorder User’s Manual describes the installation,
operation, and intended uses of the Allen-Bradley Data Cartridge
Recorder (cat. no. 1770-SB). Familiarity with the Allen-Bradley
processor to be used with the recorder is assumed. If unfamiliar with an
Allen-Bradley processor to be used with the recorder, refer to the
document specified in table 1.A for further information.
Table 1.A
Supporting
Documentation
Processor
Publication T
ile
Publication Number
PLC4 Microtrol PLC4 Microcontrol Programmable Controller
Product Guide
1773800
PLC3
PLC3 Programmable Controller Programming
Manual
1775801
PLC2/30
PLC2/30 Programmable Controller Programming
and Operations Manual
1770806
PLC2/20
PLC2/20 Programmable Controller Programming
and Operations Manual
1772802
MiniPLC2/15
MiniPLC2/15 Programmable Controller
Programming and Operations Manual
1772804
MiniPLC2
MiniPLC2 Programmable Controller
Programming and Operations Manual
1772821
PLC2
PLC2 Programmable Controller User
'
s Manual
1772800
PLC
PLC Programmable Controller Programming and
Operations Manual and PLC Programmable
Controller Program Panel Interface Module
Operating Instructions
1774800
1774817
Series 7100 CNC
Programmable Interface User
'
s Guide
71004.2
Series 8200 CNC
Programming Manual (2axis Lathe)
Programming Manual (Mill)
Robot User
'
s Manual
82005.2.1
82005.2.3
82005.2.4
Scope of Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com