Introduction
Chapter 1
13
The contents of the mini-data cartridge can be protected using the
RECORD tab (Figure 1.1). If the tab is positioned to the right, the tape is
protected. If the tab is positioned to the left, the tape is unprotected and
can be recorded on.
Figure 1.1
Mini
Data Cartridge
RECORD
CAT. NO. 1770XJ
MINI DATA CARTRIDGE
10014
When a program is recorded, you should mark the following information
on the blank data cartridge information label provided with each cartridge.
Tape name
file name
Program identification
Processor identification
Memory size
Data table size
Date
If multiple programs are recorded on one data cartridge, this information
must be supplied for each program. List programs in the order that they
appear on tape and list the track used for each program. It is important
that this information be clearly marked on the data cartridge. Individuals
unfamiliar with the contents of the tape will need this information to use
the programs.
Marking Tapes
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
