Allen-Bradley Compact 5000 - Page 46

46 Rockwell Automation Publication 5069-UM003A-EN-P - May 2018
Chapter 4 Configure Compact 5000 I/O Serial Module
5. At the warning dialog box, click Yes.
6. Close the Select Module Type dialog box.
To add additional local I/O modules with this method, complete one of the
following:
• If you cleared the Close on Create checkbox when you created the first
I/O module, repeat steps 3
…6.
• If you did not clear the Close on Create checkbox when you created the
first I/O module, repeat steps 2
…6.
TIP If you inhibit the module connection, you must remember to
uninhibit the connection later.