Allen-Bradley Compact 5000 - Page 48

48 Rockwell Automation Publication 5069-UM003A-EN-P - May 2018
Chapter 4 Configure Compact 5000 I/O Serial Module
2. Select the module and click create.
3. At the New Module window, configure the module properties and
click OK.
To add additional local I/O modules with this method, complete one of
the following:
• If you cleared the Close on Create checkbox when you created the first
I/O module, repeat steps 2
…3.
• If you did not clear the Close on Create checkbox when you created the
first I/O module, repeat steps 1
…3.