Rockwell Automation Publication 193-QR004B-EN-P - January 2017 5
Preface
About This Publication
This manual describes the minimum steps required to install and configure the E300™ Electronic Overload Relay. More
detailed information about the E300 Electronic Overload Relay is available in the E300 Electronic Overload Relay User
Manual, publication
193-UM015.
The beginning of each chapter contains the following information. Read these sections carefully before you begin work
in
each chapter:
• Be
fore You Begin
- The chapters in this quick start do not have to be completed in the order in which they appear.
However, this section defines the minimum amount of preparation that is required before completing the current
chapter.
• What You Need
- This section lists the tools that are required to complete the steps in the current chapter,
including, but not limited to, hardware and software.
• Follow These Steps
- This section illustrates the steps in the current chapter and identifies the steps that are
required to complete the examples.
Terminology
Throughout this manual, we refer to the E300™ electronic overload relay as “the E300 relay”. This term is used
interchangeably with “E300 electronic overload relay”; they are synonymous.
Additional Resources
These documents contain additional information concerning related products from Rockwell Automation.
You can view or download publications at
http://www.rockwellautomation.com/global/literature-library/overview.page. To order paper copies of technical
documentation, contact your local Allen-Bradley distributor or Rockwell Automation sales representative.
Resource Description
E300 Electronic Overload Relay Selection Guide, publication
193-SG010 Provides product selection information about the E300 overload relay.
E300 Electronic Overload Relay User Manual, publication 193-UM015 Provides complete user information about the E300 overload relay.
DeviceLogix™ System User Manual, publication RA-UM003B Provides complete information about the DeviceLogix editor and its functions.
Industrial Automation Wiring and Grounding Guidelines, publication
1770-4.1 Provides general guidelines for installing a Rockwell Automation industrial system.
Product Certifications website,
http://www.rockwellautomation.com/global/certification/overview.page
Provides declarations of conformity, certificates, and other certification details.
To Next Page
Loading...
Need help?
General
