26 Rockwell Automation Publication 193-QR004B-EN-P - January 2017
Chapter 2
Use Output Tags to Control the Motor
To have the Logix controller operate the motor, you need to enable a specific output tag for the appropriate Operating
Mode and start type.
Non-Reversing Start Command
Wye (Star) / Delta Start Command
Forward Start Command (Reversing Starter)
Speed 1 Start Command (2-Speed Starter)
A non-reversing starter, a wye (Star) / delta starter, the forward start command for a reversing starter, and the speed 1
start command for a two-speed starter use output tag :O.LogicDefinedPt00Data to start the motor.
To Next Page
Loading...
