Allen-Bradley MicroLogix 1762-IF2OF2

Publication 1762-IN005A-US-P
Installation Instructions
MicroLogix™ Analog Input/Output
Module
(Catalog Number 1762-IF2OF2)
Inside…
For More Information................................................................................2
Description................................................................................................3
Installation ................................................................................................4
Mounting...................................................................................................5
System Assembly......................................................................................7
Field Wiring Connections..........................................................................8
Input Type Selection ................................................................................ 8
Output Type Selection ............................................................................. 8
Wiring ..................................................................................................... 9
I/O Memory Mapping .............................................................................13
Specifications .........................................................................................18
Hazardous Location Considerations .......................................................22
Environnements dangereux ....................................................................23
Allen-Bradley HMIs

Allen-Bradley MicroLogix 1762-IF2OF2 Specifications

General

Product Type	Analog I/O Module
Input Channels	2
Output Channels	2
Input Resolution	12 bits
Output Resolution	12 bits
Voltage Input Range	0-10V
Current Input Range	0-20mA, 4-20mA
Voltage Output Range	0-10V
Current Output Range	0-20mA, 4-20mA
Isolation	1500V
Operating Temperature	0 to 60 °C
Compatibility	MicroLogix 1400, MicroLogix 1200, MicroLogix 1500
Power Supply	24V DC
Output Type	Voltage, Current

Summary

Installation

Prevent Electrostatic Discharge

Guidelines to prevent damage from static electricity.

Remove Power

Instructions for safely removing power before module installation.

Mounting

DIN Rail Mounting

Details the procedure for mounting the module on a DIN rail.

Panel Mounting

Provides instructions for mounting the module to a panel.

Field Wiring Connections

Grounding the Module

Explains the requirements for grounding the module properly.

Wiring

System Wiring Guidelines

General guidelines for wiring the module and system.

Terminal Block Layout

Wiring the Finger-Safe Terminal Block

IO Memory Mapping

Addressing

Specifications

Electrical and EMC Specifications

Input Specifications

Output Specifications

Hazardous Location Considerations